Published at Monday, November 12th 2018. by Erna Cameron in Ceiling Light.
Install a ceiling fan in your home. Also where the light mounting kit mat mounts on to the bottom housing. There are a nut and a washer that you need to put on there and tighten that up. That's just to secure your light housing kit. Now we're going to go ahead and tighten that up with some pliers. Okay, this is just the ballast, and here are your two wires.
Now we're going to go ahead and hook these up the black to the blue wire nuts again placed on screw the wire nuts on as you're holding the wires tightly and then the white to the white. Something like that's fine and we've got that put together. We will gently tuck these wires out of the way and push the wires down into the housing gently, don't disconnect anything and then, when it all, looks good study it and see if there are any wires touching anything if you think anything's going to rub off or and That all looks pretty good right there.
So now we're going to hook up this connector and we will put the two screws in three screws and then we will have our light kit attached to the housing and hooked on to the ceiling fans. This completes the ceiling fan installation. Now we can stay warm in the winter cool in the summer and we have plenty of light to complete our tasks.
Any content, trademark’s, or other material that might be found on the somnathmahadev.com website that is not somnathmahadev.com’s property remains the copyright of its respective owner/s. In no way does somnathmahadev.com claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2018 somnathmahadev.com. All Rights Reserved.