Published at Saturday, November 10th 2018. by Doreen Hahn in Ceiling Light.
installing cabinet lights, you little confused, or maybe you just never thought about it. Well, I'm gonna show you just how simple the process really is and the best part is it's all controlled by just one switch. So here's all we need to get started. Your driver, dick LED tape, LED KB, 12 LED and they're coordinating power cords and your basic tools, a drill, power, screwdriver tape, measure, and a pencil. So with just these few products, you can have your kitchen design go from drab to dynamic, and, what's so great is that it can all be done in just one afternoon.
It's gonna add value to your customer because the kitchen is always a gathering place. It'll help you capitalize on those extra profits you can earn between 1,500 and 2,000 dollars per job. It's gonna help. You gain the market share and let's face it. The end result is just so much more appealing, so you have a lot of options when it comes to cabinet lighting, but for this installation I'm the news Herod's dick LED the KB 12 LED and the tape LED because it's ease of installation they have excellent color Consistency they're low voltage, and they consume very little energy they're almost 10 times more efficient than halogen, and it is the Highest quality LED, let's face it, you don't want to put your name and your reputation behind a product, that's inferior.
I can go on and on about the benefits of Hera LED. So let's get on the fun stuff. So before you begin make sure you're read your manufacturer's instructions thoroughly and then all you need to do is just lay your lights out on the counter, so you can determine your spacing and your layout. This will help make everything a lot quicker when it comes to your actual installation. So once you have all your locations marked, go ahead and screw your mounting clips in place.
Make sure you have everything clean and taken out of your cabinet, so you can get a great angle shot for your drill so for this application, we're gonna install the driver on the top of the cabinet so that it's not visible and then all we need To do is drill holes for the virus, so we're gonna drill one hole on the bottom and then we're going to drill one hole on the top.
So once your holes are all drill, now we're just going to pull the wire through to reach up to the driver on the top now plug your lights into the power cord and then just snap, your lights in place and now for the installation of the LED Spotlights in the upper cabinets, as I mentioned earlier, we're going to use the KB 12 LED spotlight and then just check your instructions and make sure you got the right size drill bit. And your next step is to mark your location and then drill your hole. And it's as simple as that folks, now all we need to do put the wires up there and then just have your light in place.
Any content, trademark’s, or other material that might be found on the somnathmahadev.com website that is not somnathmahadev.com’s property remains the copyright of its respective owner/s. In no way does somnathmahadev.com claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2018 somnathmahadev.com. All Rights Reserved.