Published at Friday, November 16th 2018. by Felecia Stephenson in Ceiling Light.
A light kit for your hunter ceiling, fan before installation turn off your power at the circuit, breaker. First, uninstall the pull chain pendants next unscrew, the final from the bottom of the bowl, remove the cap as well as the globe keeper, and now remove the glass next uninstall, the bulbs unscrewing both bulbs from their sockets next, using a Phillips head screwdriver remove the two Screws located on the bottom of the fan cap disconnect the wires from the light kit tuck any remaining wires back into the switch housing and install the cap using a Phillips' head.
You want to make sure that each one of the three screws is started before you finish out, tightening it all together, excellent now that we got the cover on for the lighting housing. Now, all we have to do is put on the Globes there are three screws that are already here to hold about. We just want to back them out, and you don't want to take them all the way out. We just want to make room for the globe itself to be able to fit up around the socket there.
Screwdriver installs the cap using the two screws provided reinstall the pull ten-dance restore power at the breaker, as well as the switch in the room. Congratulations, you have now uninstalled a light kit visit us on our website for additional information about product features and warranty information.
Any content, trademark’s, or other material that might be found on the somnathmahadev.com website that is not somnathmahadev.com’s property remains the copyright of its respective owner/s. In no way does somnathmahadev.com claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2018 somnathmahadev.com. All Rights Reserved.